-
Learn how to configure and wire Cradlepoint IBR 600/900, 1100, 1700, R1900, and R920 series routers for use with HAAS Alert’s Safety Cloud. Covers R2V and R2R integration, NetCloud setup, GPIO wiring, and installation tips.
-
Last Updated: 07/21/2025
in Digital AlertingLearn how to install the HAAS Alert digital alerting transponder (HA-5 or HA-7), including power, ground, input wiring, and best practices for placement and safety.
-
earn how to wire emergency lights to your Samsara VG-54/55 Gateway, including how to order the AUX cable, connect it, and verify alert functionality.
-
This article describes connecting the vehicle warning/emergency lights to the Geotab GO device.
-
Last Updated: 07/22/2025
in Safety Cloud® General FAQSafety Cloud® enables real-time digital alerts from emergency and roadway vehicles to nearby drivers. Learn how the system works and see a video overview.
-
Last Updated: 07/22/2025
in Safety Cloud® General FAQLearn how the HAAS Alert name originated—from an early acronym to honoring founder Cory Hohs after a near-miss incident that inspired the company’s mission.
-
This article outlines the steps to create and assign a group of vehicles connected to Safety Cloud®.
-
Last Updated: 07/21/2025
in Digital AlertingFind out which drivers, apps, and vehicles receive digital alerts from HAAS Alert, including Waze, Apple Maps, and OEM dashboards like Uconnect and Car-Net.
-
Last Updated: 02/21/2025
in Safety Cloud® DashboardThis article describes how to reset the Safety Cloud Dashboard password.
-
Learn how to create and assign tags to vehicles in your Samsara dashboard so they activate properly with HAAS Alert.
