-
Last Updated: 07/22/2025
in Integrations Overview & FAQsThis article provides information regarding road side units (RSUs).
-
Set up Safety Cloud digital alerting on your Ericsson Cradlepoint devices in six easy steps. Includes optional Responder-to-Responder (R2R) setup, wiring instructions, and key prerequisites.
-
Last Updated: 07/25/2025
in Safety Cloud® General FAQHAAS Alert hardware is FCC, CE, and RCM certified to meet safety and regulatory standards in the U.S., EU, and Australia/New Zealand.
-
Last Updated: 12/02/2025
in Digital AlertingLearn when and how to use an external antenna with the HA-5 and HA-7 Digital Alerting Transponders. Includes mounting guidance, signal tips, and compliance reminders.
-
Learn how to wire the Ericsson IBR900 / IBR600 router to trigger HAAS Alert digital alerts. Follow this step-by-step guide to connect via the 4-pin power port or GPIO extensibility cable safely.
-
Learn how to wire the Ericsson R980 router to trigger HAAS Alert digital alerts. Follow this step-by-step guide to connect via the 4-pin power port safely.
-
Assign the HAAS Alert SDK to your Ericsson Groups in NetCloud Manager to ensure proper router communication with Safety Cloud. This guide walks you through selecting groups, managing NCOS SDK applications, and assigning the SDK in just a few steps.
-
Learn how to wire the Ericsson R920 router to trigger HAAS Alert digital alerts. Follow this step-by-step guide to connect via the 4-pin power port or GPIO extensibility cable safely.
-
Learn how to wire the Ericsson R1900 router to trigger HAAS Alert digital alerts. Follow this step-by-step guide to connect via the 4-pin power port or GPIO extensibility cable safely.
-
Easily assign routers to HAAS Alert groups in NetCloud Manager so they inherit the SDK application and configuration. Follow these steps to complete your HAAS Alert integration.
