The last configuration step for the HAAS Alert / Ericsson integration is to add the routers to the groups that will receive the SDK application. Thus far, you should have added the SDK application to NetCloud Manager, created the groups for HAAS Alert, added the JSON configuration, and configured the GPIOs. In this article, you'll add routers to the HAAS Alert group(s).
Warning: Only continue if you created specific groups for HAAS Alert. Otherwise, no further action is required.
Assign Routers
- In the left menu, click Devices
- Tick the box next to all the routers being assigned to the same Group
- Click Move in the top menu
- In the pop-up window, select the appropriate Group
- Click OK
- Repeat the previous steps for all NEW groups with routers being activated with HAAS Alert
At this point, the HAAS Alert SDK application is in the process of being downloaded to the routers in the Group.
 |
No further action is required in NetCloud Manager
Other helpful Ericsson guides
- Add or Update the HAAS Alert SDK in NetCloud Manager
- Assign the HAAS Alert SDK to the group
- Configure R2R for NetCloud Manager
- Add the JSON configuration to NetCloud Manager
- Wire the vehicles (R1900, IBR1700, IBR900/600, R920, IBR1100, R980)
✉️ Can't find what you're looking for? Contact Us
